Tile Repair glossary
The terms you'll come across, explained in plain English.
- Back-buttering
- Spreading a thin layer of adhesive on the back of a tile before bedding it, to fill hollows and give full coverage. It is especially important for large format tiles.
- Backer board
- A cement-based or insulated waterproof board fixed to walls or floors to provide a stable, water-resistant base for tiling, often used in showers and over timber floors.
- Decoupling membrane
- A thin matting laid between a floor and tiles that absorbs small movements in the substrate, helping prevent tiles and grout cracking.
- Dot-and-dab
- Fixing tiles with dabs of adhesive at the corners and centre rather than a full bed. On floors it leaves voids, causing hollow sounding tiles that may crack.
- Efflorescence
- White powdery salt marks that appear on tiles or grout when moisture carries dissolved salts to the surface and evaporates, common in older solid floors.
- Encaustic tile
- A tile where the pattern is formed by inlaying different coloured clays into the body, rather than printing on the surface. Common in Victorian floors.
- Epoxy grout
- A two-part resin grout that is highly resistant to water, stains and chemicals. It suits showers and kitchens but is slower and harder to apply than standard grout.
- Grout
- The material that fills the joints between tiles. Usually cement-based, it helps lock tiles in place and finishes the surface, but it is porous and can stain or crack over time.
- Hollow tile
- A tile that has lost contact with the adhesive or surface beneath, giving a dull sound when tapped. It may crack or come loose under load.
- Large format tile
- Tiles with at least one side of 600 millimetres or more. They need very flat substrates and full adhesive coverage to avoid lippage and hollows.
- Movement joint
- A flexible joint, usually filled with silicone or a profile, around the edges of tiled areas and at intervals in large floors, allowing for expansion and contraction.
- Sanitary silicone
- A flexible sealant with fungicide used where tiles meet baths, shower trays, basins and worktops. It accommodates movement that would crack rigid grout.
- Substrate
- The surface tiles are fixed to, such as plaster, plasterboard, cement board, screed, concrete or timber. Its stability and preparation decide how well tiles bond.
- Tanking
- A waterproof membrane or liquid coating applied to walls and floors in wet areas before tiling, stopping water getting through to the structure if grout or silicone fails.
- Tile adhesive
- A cement-based or ready-mixed paste used to bond tiles to walls and floors. Different types suit different tiles, substrates and wet areas.
Get a free tile repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote