Tile Repair
Shower and Bath Resealing
Removing old silicone and mould around baths, showers and basins and resealing with sanitary-grade silicone.

What's involved
Silicone sealant around baths and shower trays takes the most punishment in a bathroom. Once it peels, discolours or grows black mould, water can get behind it and damage the wall or floor below. The tiler cuts away all old silicone, removes residue with a dedicated remover, treats any mould, and lets the joint dry fully. Baths are filled with water before sealing so the joint is set at its widest, preventing it splitting when the bath is next used. A sanitary-grade, mould-resistant silicone is applied in a continuous bead and tooled smooth. Small cracks in the tile grout around the shower are also sealed. A typical bath or shower takes one to two hours. You need to leave the seal to cure for 24 hours before use.
How we handle it
Send photos
Use the quote form to tell us what is damaged, the tile type, wall or floor, and whether you have spares. Close-up and wider photos help the tiler assess the job.
Check and price
A local tiler reviews the photos or visits to check for hollow tiles, movement or leaks, and gives you a fixed price for the repair.
Source matching tiles
If you have no spares, the tiler helps source matching or close tiles, or recommends chip repair instead of replacement.
Repair
Damaged tiles are cut out and replaced, chips filled, loose tiles rebedded, grout replaced or seals renewed, with neighbouring tiles protected throughout.
Grout, seal and hand over
Joints are grouted to match, stone is sealed and the area cleaned. The tiler tells you when the floor or shower can be used again.
Price guide
Tile repair prices depend on how many tiles are affected, the tile type and whether the cause needs fixing as well. Replacing one or two tiles is a short job, while regrouting a bathroom takes a day. We provide a fixed price after photos or a short visit, including materials and grout.
- Replace one to three cracked tiles: £90–£220. Removing damaged tiles and fitting supplied spares, regrouted to match.
- Victorian tiled floor repair: from £250. Replacing damaged geometric or encaustic tiles with reclaimed or new matching pieces.
- Bath or shower reseal: £80–£160. Removing old silicone, treating mould and applying new sanitary-grade sealant.
Questions about shower and bath resealing
How long after tile repair can I use the shower?
Most tile repairs need around 24 hours before the shower is used. Rapid-set adhesives and grouts can shorten this to a few hours, but silicone sealant still needs a full day to cure before getting wet. Your tiler will tell you the exact time for the products used.
Other services
Cracked Tile Replacement
Cutting out cracked or broken wall and floor tiles and fitting replacements flush with the surrounding tiling.
Chip and Crack Filling
Filling chips, scratches and hairline cracks in ceramic, porcelain and stone tiles with colour-matched resin.
Loose and Hollow Tile Refixing
Lifting and rebedding tiles that rock, sound hollow or have lifted, after finding and fixing the cause.
Regrouting
Raking out cracked, stained or mouldy grout and replacing it with fresh cementitious or epoxy grout.
Natural Stone and Period Tile Repair
Repairing Victorian geometric, encaustic, quarry, marble and slate tiles with matched materials and traditional methods.
Shower and Bath Resealing near you
Get a free tile repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote