Tile Repair

Tile Repair

Regrouting

Raking out cracked, stained or mouldy grout and replacing it with fresh cementitious or epoxy grout.

Free Tile Repair quote

No obligation. We only use your details to reply about this job.

Regrouting — Tile Repair

What's involved

Grout cracks when tiles move, discolours from cleaning products and limescale, and grows mould where showers do not dry out. Regrouting involves raking out the old grout to at least two-thirds of the tile thickness with a grout saw or powered tool, vacuuming the joints, and pressing in new grout with a rubber float. Excess is cleaned off with a damp sponge and the haze polished away. Modern flexible cementitious grouts suit most homes, while epoxy grout is waterproof and stain-resistant, ideal for showers and kitchen worktops, though harder to apply. A standard bathroom wall takes a day; floors take less. You need to avoid showering for 24 hours afterwards, and choose a grout colour, as changing colour is easy at this stage.

How we handle it

  1. Send photos

    Use the quote form to tell us what is damaged, the tile type, wall or floor, and whether you have spares. Close-up and wider photos help the tiler assess the job.

  2. Check and price

    A local tiler reviews the photos or visits to check for hollow tiles, movement or leaks, and gives you a fixed price for the repair.

  3. Source matching tiles

    If you have no spares, the tiler helps source matching or close tiles, or recommends chip repair instead of replacement.

  4. Repair

    Damaged tiles are cut out and replaced, chips filled, loose tiles rebedded, grout replaced or seals renewed, with neighbouring tiles protected throughout.

  5. Grout, seal and hand over

    Joints are grouted to match, stone is sealed and the area cleaned. The tiler tells you when the floor or shower can be used again.

Price guide

Tile repair prices depend on how many tiles are affected, the tile type and whether the cause needs fixing as well. Replacing one or two tiles is a short job, while regrouting a bathroom takes a day. We provide a fixed price after photos or a short visit, including materials and grout.

  • Bath or shower reseal: £80–£160. Removing old silicone, treating mould and applying new sanitary-grade sealant.
  • Regrout bathroom walls: £300–£700. Raking out and regrouting a typical bathroom or shower enclosure in a day.
  • Refix loose or hollow tiles: £120–£350. Lifting and rebedding a small area with flexible adhesive, depending on extent.

Questions about regrouting

Can chipped tiles be repaired without replacing them?

Yes. Chips in glazed ceramic and porcelain tiles can be filled with tinted epoxy or acrylic resin, cured and polished to match the surface sheen. Done well, the repair is very hard to spot at normal viewing distance. It is a good option when no replacement tiles are available.

Why do tiles sound hollow?

Tiles sound hollow when there are voids in the adhesive underneath, often because they were fixed with dots of adhesive rather than a solid bed. Hollow tiles are more likely to crack under load. If only a few sound hollow and are not cracked, they may be left, but loose or cracked ones should be rebedded.

How often should grout be replaced?

Good grout can last many years, but in showers and busy floors it often needs replacing every 10 to 15 years, or sooner if it cracks, crumbles or holds mould that cleaning will not shift. Regrouting is much cheaper than retiling and makes tiling look almost new.

Get a free tile repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote