Tile Repair
Cracked Tile Replacement
Cutting out cracked or broken wall and floor tiles and fitting replacements flush with the surrounding tiling.

What's involved
The tiler first removes the grout around the damaged tile with an oscillating multi-tool or grout saw, so the neighbouring tiles are not disturbed. The tile is then broken out from the centre, working towards the edges, and the old adhesive is chiselled back to give a flat bed deep enough for the new tile. A replacement is buttered with fresh adhesive, flexible for floors or where there is movement, pressed into place and levelled with the surrounding tiles. After the adhesive has set, usually overnight or a few hours with rapid-set products, the joints are grouted to match. Each tile takes 30 to 60 minutes. You need to provide spare tiles if you have them, as matching an older tile can be the hardest part of the job.
How we handle it
Send photos
Use the quote form to tell us what is damaged, the tile type, wall or floor, and whether you have spares. Close-up and wider photos help the tiler assess the job.
Check and price
A local tiler reviews the photos or visits to check for hollow tiles, movement or leaks, and gives you a fixed price for the repair.
Source matching tiles
If you have no spares, the tiler helps source matching or close tiles, or recommends chip repair instead of replacement.
Repair
Damaged tiles are cut out and replaced, chips filled, loose tiles rebedded, grout replaced or seals renewed, with neighbouring tiles protected throughout.
Grout, seal and hand over
Joints are grouted to match, stone is sealed and the area cleaned. The tiler tells you when the floor or shower can be used again.
Price guide
Tile repair prices depend on how many tiles are affected, the tile type and whether the cause needs fixing as well. Replacing one or two tiles is a short job, while regrouting a bathroom takes a day. We provide a fixed price after photos or a short visit, including materials and grout.
- Replace one to three cracked tiles: £90–£220. Removing damaged tiles and fitting supplied spares, regrouted to match.
- Victorian tiled floor repair: from £250. Replacing damaged geometric or encaustic tiles with reclaimed or new matching pieces.
- Bath or shower reseal: £80–£160. Removing old silicone, treating mould and applying new sanitary-grade sealant.
Questions about cracked tile replacement
Can a single cracked tile be replaced?
Yes. A tiler removes the grout around the cracked tile, breaks it out carefully, cleans back the old adhesive and fits a replacement flush with the surrounding tiles. It is then grouted to match. The main challenge is finding a matching tile, so keep spares from the original installation if you have them.
Other services
Chip and Crack Filling
Filling chips, scratches and hairline cracks in ceramic, porcelain and stone tiles with colour-matched resin.
Loose and Hollow Tile Refixing
Lifting and rebedding tiles that rock, sound hollow or have lifted, after finding and fixing the cause.
Regrouting
Raking out cracked, stained or mouldy grout and replacing it with fresh cementitious or epoxy grout.
Shower and Bath Resealing
Removing old silicone and mould around baths, showers and basins and resealing with sanitary-grade silicone.
Natural Stone and Period Tile Repair
Repairing Victorian geometric, encaustic, quarry, marble and slate tiles with matched materials and traditional methods.
Cracked Tile Replacement near you
Get a free tile repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote