Tile Repair

Tile Repair

Natural Stone and Period Tile Repair

Repairing Victorian geometric, encaustic, quarry, marble and slate tiles with matched materials and traditional methods.

Free Tile Repair quote

No obligation. We only use your details to reply about this job.

Natural Stone and Period Tile Repair — Tile Repair

What's involved

Victorian geometric and encaustic floors in hallways often have cracked, missing or lifted tiles. The specialist removes damaged pieces, cleans back the original lime or cement bed and fits reclaimed or newly made matching tiles, which are available in many traditional colours and shapes. Encaustic patterns can be matched by specialist manufacturers. Quarry tiles are rebedded and pointed with a suitable mortar. Marble, limestone and travertine tiles can have chips filled with tinted resin and are honed and resealed so the repair blends. Old floors may have bitumen adhesive, which is handled carefully. Small repairs take half a day; restoring a whole hallway can take several days. You need to keep any loose original pieces, as they are often reusable.

How we handle it

  1. Send photos

    Use the quote form to tell us what is damaged, the tile type, wall or floor, and whether you have spares. Close-up and wider photos help the tiler assess the job.

  2. Check and price

    A local tiler reviews the photos or visits to check for hollow tiles, movement or leaks, and gives you a fixed price for the repair.

  3. Source matching tiles

    If you have no spares, the tiler helps source matching or close tiles, or recommends chip repair instead of replacement.

  4. Repair

    Damaged tiles are cut out and replaced, chips filled, loose tiles rebedded, grout replaced or seals renewed, with neighbouring tiles protected throughout.

  5. Grout, seal and hand over

    Joints are grouted to match, stone is sealed and the area cleaned. The tiler tells you when the floor or shower can be used again.

Price guide

Tile repair prices depend on how many tiles are affected, the tile type and whether the cause needs fixing as well. Replacing one or two tiles is a short job, while regrouting a bathroom takes a day. We provide a fixed price after photos or a short visit, including materials and grout.

  • Victorian tiled floor repair: from £250. Replacing damaged geometric or encaustic tiles with reclaimed or new matching pieces.
  • Bath or shower reseal: £80–£160. Removing old silicone, treating mould and applying new sanitary-grade sealant.
  • Regrout bathroom walls: £300–£700. Raking out and regrouting a typical bathroom or shower enclosure in a day.

Questions about natural stone and period tile repair

How much does tile repair cost?

Replacing one to three cracked tiles typically costs £90 to £220. Chip repairs are usually £60 to £150. Refixing loose tiles costs £120 to £350, regrouting a bathroom £300 to £700 and resealing a bath or shower £80 to £160. Period floor repairs start from around £250.

Can chipped tiles be repaired without replacing them?

Yes. Chips in glazed ceramic and porcelain tiles can be filled with tinted epoxy or acrylic resin, cured and polished to match the surface sheen. Done well, the repair is very hard to spot at normal viewing distance. It is a good option when no replacement tiles are available.

How long after tile repair can I use the shower?

Most tile repairs need around 24 hours before the shower is used. Rapid-set adhesives and grouts can shorten this to a few hours, but silicone sealant still needs a full day to cure before getting wet. Your tiler will tell you the exact time for the products used.

Get a free tile repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote