Guide · Homeowners · 4 min read · Updated 17 November 2026
How Much Does Tile Repair Cost in the UK?
Short answer
Tile repair in the UK typically costs £60–£700. Filling a chipped tile costs £60–£150, replacing one to three cracked tiles £90–£220, refixing loose or hollow tiles £120–£350, resealing a bath or shower £80–£160 and regrouting bathroom walls £300–£700. Victorian and period tiled floor repairs start from £250. Matching spare tiles, access and the cause of failure affect the final price.
Typical tile repair prices in 2026
Most tile repairs are priced per job, because the time on site is driven by setting up, carefully cutting out damaged tiles without harming their neighbours, and waiting for adhesive and grout to set. The table below shows typical UK prices for the repairs we arrange most often. They assume standard ceramic or porcelain tiles, normal access and that you have spare tiles or a close match is available. Natural stone, large format tiles and period encaustic floors cost more because they take longer and need specialist materials.
| Repair | Typical price | Time on site |
|---|---|---|
| Tile chip repair | £60–£150 | 1–2 hours |
| Replace one to three cracked tiles | £90–£220 | Half day, grout next visit or same day |
| Refix loose or hollow tiles | £120–£350 | Half to full day |
| Bath or shower reseal | £80–£160 | 2–3 hours plus curing |
| Regrout bathroom walls | £300–£700 | 1–2 days |
| Victorian tiled floor repair | from £250 | 1 day upwards |
What affects the price
The single biggest factor is whether replacement tiles exist. If you kept spares from the original job, the repair is straightforward. If not, the tiler may need to source a match, which can take time for discontinued ranges, or suggest a contrasting feature tile or a chip repair instead. Size also matters. Large format porcelain tiles of 600 by 600 millimetres or more are heavy, harder to remove cleanly and need full adhesive coverage, so they cost more to replace than small wall tiles.
The reason the tile failed changes the job too. A tile cracked by a dropped pan is a simple swap. A crack running across several tiles often points to movement in the floor below, and that has to be addressed or the new tiles will crack again.
- Spare tiles available or a close match needed
- Tile size, thickness and material: ceramic, porcelain, natural stone or encaustic
- Location: floors, shower walls or behind fixed fittings such as toilets
- Underlying cause: impact damage, poor adhesive coverage or a moving substrate
- Grout type: standard cementitious or epoxy, which is slower to work
- Number of separate areas to repair in one visit
Replacing cracked tiles
Replacing one to three cracked tiles costs £90–£220. The tiler removes the grout around the damaged tile with an oscillating tool or grout saw, then breaks the tile out from the centre so the surrounding tiles are not disturbed. Old adhesive is scraped back to a flat surface before the replacement is bedded in fresh adhesive, levelled to its neighbours and spaced to match the existing grout lines.
On walls the tile can often be grouted the same day once the adhesive has gripped. On floors, the tiler usually leaves the adhesive to set before grouting, which may mean a short return visit. Ask whether this is included in the quote.
Chips, hollow tiles and refixing
Chip repairs at £60–£150 suit small surface damage where you do not have a spare tile. The chip is cleaned, filled with a coloured resin or epoxy filler, levelled and polished. On plain gloss tiles the result can be close to invisible. On textured or patterned tiles it will be less perfect but far less noticeable than the chip.
Refixing loose or hollow tiles costs £120–£350. Hollow tiles sound dull when tapped and are usually caused by patchy adhesive, often from the old dot-and-dab method on floors, or by movement in the substrate. The tiles are lifted, the backs and the surface below are cleaned, and they are rebedded in a full bed of adhesive. If tiles break during removal, matching replacements will be needed.
Regrouting and resealing
Regrouting bathroom walls costs £300–£700 depending on the area and tile size. Small mosaic and metro tiles have far more grout line per square metre than large tiles, so they take longer. Old grout is raked out to a consistent depth, the joints are cleaned, and new grout is worked in, shaped and cleaned off the tile faces.
Resealing a bath or shower costs £80–£160. The old silicone is cut out completely, residue and any mould are removed, the joint is dried thoroughly, and a fresh bead of sanitary silicone is applied. Filling a bath with water before sealing helps, because it lowers the bath to its loaded position and reduces the risk of the new seal tearing when someone gets in.
Is repair cheaper than retiling?
For isolated damage, repair is almost always cheaper. Retiling a bathroom involves stripping tiles, repairing or replacing boards and plaster, new adhesive, tiles and grout, and usually several days of labour. A targeted repair on one to three tiles is a fraction of that cost and causes far less disruption.
Retiling starts to make sense when many tiles are hollow across a floor, when tiles are failing because the backing board has rotted from a leak, or when the tiling is dated and you planned to change it anyway. A good tiler will tell you which situation you are in rather than patching something that will keep failing. If you are not sure which situation applies, send photos of the damaged area and the tiles around it, and say whether any have been replaced before.
Questions people also ask
How much does it cost to replace a single cracked tile?
Replacing one to three cracked tiles typically costs £90–£220, with a single tile at the lower end. Most of the cost is the call-out and careful removal, which is why doing several tiles in one visit is better value. The price assumes you have a spare tile or a matching one can be found.
Can you repair a cracked tile without replacing it?
Hairline cracks and small chips can be filled with a coloured resin filler for £60–£150. This hides the damage and seals the crack against water, but it does not restore strength. If the tile is loose or the crack is caused by floor movement, replacement and fixing the cause is the better option.
What if I do not have spare tiles?
A tiler can try to source a match from stockists or reclamation suppliers, using a photo and the tile size. If none can be found, options include taking a tile from a hidden area such as behind a washing machine, using a contrasting feature tile, or filling the damage instead of replacing it.
Written and checked by the Tile Repair team. Read our editorial policy.
More guides
How to Replace a Cracked Tile Without Damaging Others
To replace a cracked tile, rake out the grout around it, score an X across the tile and break it out from the centre with a chisel, working away from…
Why Are My Tiles Hollow or Loose? Causes and Fixes
Tiles sound hollow or come loose when the adhesive does not fully bond them to the surface beneath. Common causes are patchy adhesive coverage, an…
Regrouting vs Retiling a Bathroom: Which Do You Need?
Regrout when tiles are firmly bonded but the grout is stained, cracked, crumbling or mouldy. Retile when tiles are loose, cracked across large areas…
Victorian Tiled Floor Repair: Restore or Replace?
Most Victorian and Edwardian tiled floors can be repaired rather than replaced. A specialist lifts loose or broken tiles, sources matching reclaimed…
Get a free tile repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote